NMPRA

Jeff,
Yes, these servos are fine. The recommended torque spec by the NMPRA in the rules is 30 oz-in

The Hitec HS-85 has 41 oz-in @ 4.8v.


Randy

Here is what the rule states: "Spinner: Spinner diameter should represent that used on the full size airplane. Slightly smaller is acceptable, provided it is a minimum of 1.5" (38 mm). Spinners must be commercially available and stock. Acceptable modifications of a stock spinner are limited to remov...

The list of Approved and Recommended Components on page 1 has been updated for the new OS motor revision.


Randy

The list of Approved and Recommended Components on page 1 has been updated to reflect the commercial availability of the Invictus ARF from HobbyKing.


Randy

The list of Approved and Recommended Components on page 1 has been updated to reflect the Outrageous and Scarlet Screamer now available from Airborne Models. Also added the Thunder Power G8 70C battery.


Randy

I have been using the Hyperion DS09-SCD. A great little servo that meets the recommended minimum torque of 30 oz-in. Great price too at $28.00. Double ball bearing, digital. I have been using them in my Miss Dara, no problems.

http://hyperion-world.com/products/product/HP-DS09-SCD


Randy

Hi Jesse, Congrats on your E-F1 win! My Miss Dara takes off very nicely. Not sure what you are referring to regarding their launch.... Anyway, I can advise on cold weather and Lipos. Your temps in Sept of 50 to 70 degrees should be no problem. In Canada, our lipos for E-F1 start to get a bit "drowsy...

The Invictus is an ARF to be available from Hobby King. It is not yet commercially available. Only a few prototypes have been flown. Once it comes on the market, I will update the list of approved ARF's


Randy

The fourth thread down from the top of this Electric Pylon Racing forum section contains the updated list of recommended and approved components. You can't go wrong with these.

http://www.nmpraforum.com/viewtopic.php?f=13&t=2750


Randy

The list of Approved and Recommended Components on page 1 has been updated to reflect the new Hobby King NTM Prop Drive motor now available.


Randy

The list of Approved and Recommended Components on page 1 has been updated to reflect the new Great Planes Rimfire motor now available.


Randy

The list of Approved and Recommended Components on page 1 has been updated to reflect the new Great Planes Proud Bird ARF now available.


Randy

Darrol,
Jim's Proud Bird is coming from Great Planes. It is shown here:

http://www3.towerhobbies.com/cgi-bin/wt ... XCPFP&P=ML

But quoted as "available late November" Who knows what that means....


Randy

This list of Approved and Recommended Components on page 1 has been updated to reflect the new Nitroplanes Miss Dara ARF.


Randy

Here is a photo of the prototype from Troy Peterson.