Nipples

waruss · Post by **waruss** » Thu Dec 17, 2020 10:16 pm

Could someone tell me the source for this product? The ones I have came out of the trash cans at the races.

Thanks!

KRProton · Post by **KRProton** » Fri Dec 18, 2020 5:49 am

The ones I use most are Robart. I believe they're intended as air fittings. Problem is, I'm not sure what size - they make two or three different sizes.

I've also gotten them from McMaster-Carr.

Maybe someone else will chime in and tell the size.

Tim Lampe

cbk07 · Post by **cbk07** » Fri Dec 18, 2020 9:37 am

Robart P/N 222
1/8" L Fitting

kane · Post by **kane** » Fri Dec 18, 2020 11:36 am

McMaster Carr has the ones in the picture, they have others as well. I believe the one in the picture is 5121K902

They also have them for 1/8" tubing as well. I have shown the 3/32" version which is what I use.

https://www.mcmaster.com/barbed-90-degr ... e-id~3-32/

DK

waruss · Post by **waruss** » Fri Dec 18, 2020 7:02 pm

Thanks Guys!

KRProton · Post by **KRProton** » Fri Dec 18, 2020 7:56 pm

DK gets the award for the most thorough answer with Craig Korsen a very close second.

Tim

RSmith · Post by **RSmith** » Sat Dec 19, 2020 9:44 am

I would like to know the source for the plastic tear-drop fitting that slides over your fuel line and is used to pinch off the fuel prior to the motor. I used to buy them from HobbyKing but they are no longer available. Anyone have a clue where to find those little things. They are very handy and hard to find at the scene of the crash! I could use about a dozen of them.

Randy

stoned · Post by **stoned** » Sat Dec 19, 2020 10:35 am

Mike Langlois has been known to make them in the past. Made out of aluminum not plastic. I don't know if he has any right now. Dean

cbk07 · Post by **cbk07** » Sat Dec 19, 2020 10:55 am

Randy, the last ones I got were from Allen Booth that makes Mastertach. His info is in the back of the newsletters. If he can’t help you, I have a handful and can send you some

RSmith · Post by **RSmith** » Sat Dec 19, 2020 10:35 pm

Perfect. Thanks Craig. I'll try Allen Booth first.

Randy

iamtom · Post by **iamtom** » Sun Dec 20, 2020 7:40 am

Contact Allen Booth. For the shut off’s.
rcflyer39@hotmail.com
He also has the cup and wire shutoff’s available used from servo to firewall.
Tom

airplanescotty · Post by **airplanescotty** » Mon Dec 21, 2020 3:38 pm

Well,,,, This thread clearly falls short of my expectations!!!!

DHULEN · Post by **DHULEN** » Mon Dec 21, 2020 5:11 pm

I was thinking the same thing pretty boring thread with title of nipples

fizzwater2 · Post by **fizzwater2** » Tue Dec 22, 2020 1:18 am

Here's a nice pair!

gsjames · Post by **gsjames** » Thu Dec 24, 2020 8:59 pm

I think that these "pinch offs" are actually medical supplies used for I.V. lines.

NMPRA

Nipples

Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples

Re: Nipples