Nipples
Re: Nipples
The ones I use most are Robart. I believe they're intended as air fittings. Problem is, I'm not sure what size - they make two or three different sizes.
I've also gotten them from McMaster-Carr.
Maybe someone else will chime in and tell the size.
Tim Lampe
I've also gotten them from McMaster-Carr.
Maybe someone else will chime in and tell the size.
Tim Lampe
Re: Nipples
Robart P/N 222
1/8" L Fitting
1/8" L Fitting
Re: Nipples
McMaster Carr has the ones in the picture, they have others as well. I believe the one in the picture is 5121K902
They also have them for 1/8" tubing as well. I have shown the 3/32" version which is what I use.
https://www.mcmaster.com/barbed-90-degr ... e-id~3-32/
DK
They also have them for 1/8" tubing as well. I have shown the 3/32" version which is what I use.
https://www.mcmaster.com/barbed-90-degr ... e-id~3-32/
DK
Re: Nipples
DK gets the award for the most thorough answer with Craig Korsen a very close second.
Tim
Tim
-
- Super Contributor
- Posts: 268
- Joined: Wed May 01, 2002 9:28 am
- Location: Calgary, AB, Canada
- Contact:
Re: Nipples
I would like to know the source for the plastic tear-drop fitting that slides over your fuel line and is used to pinch off the fuel prior to the motor. I used to buy them from HobbyKing but they are no longer available. Anyone have a clue where to find those little things. They are very handy and hard to find at the scene of the crash! I could use about a dozen of them.
Randy
Randy
_____________________________________
http://www.cppra.org/
http://www.cppra.org/
Re: Nipples
Mike Langlois has been known to make them in the past. Made out of aluminum not plastic. I don't know if he has any right now. Dean
Re: Nipples
Randy, the last ones I got were from Allen Booth that makes Mastertach. His info is in the back of the newsletters. If he can’t help you, I have a handful and can send you some
-
- Super Contributor
- Posts: 268
- Joined: Wed May 01, 2002 9:28 am
- Location: Calgary, AB, Canada
- Contact:
Re: Nipples
Perfect. Thanks Craig. I'll try Allen Booth first.
Randy
Randy
_____________________________________
http://www.cppra.org/
http://www.cppra.org/
-
- Super Contributor
- Posts: 646
- Joined: Thu May 09, 2002 8:11 pm
- Location: Cincinnati, Ohio
- Contact:
Re: Nipples
Contact Allen Booth. For the shut off’s.
rcflyer39@hotmail.com
He also has the cup and wire shutoff’s available used from servo to firewall.
Tom
rcflyer39@hotmail.com
He also has the cup and wire shutoff’s available used from servo to firewall.
Tom
123READY TURN
- airplanescotty
- Super Contributor
- Posts: 700
- Joined: Thu Jan 14, 2010 9:58 am
- Location: Central Florida
Re: Nipples
Well,,,, This thread clearly falls short of my expectations!!!!
QTR ~ Waste Not A Moment!!!!!
Re: Nipples
I was thinking the same thing pretty boring thread with title of nipples
-
- Super Contributor
- Posts: 513
- Joined: Wed Mar 09, 2011 11:44 am
- Location: Paola, KS
- Contact:
Re: Nipples
Here's a nice pair!
- Attachments
-
- image.jpg (4.49 KiB) Viewed 1403 times
Out of all the places we could be, this is one of them.
Re: Nipples
I think that these "pinch offs" are actually medical supplies used for I.V. lines.