Quick question:
Posted: Thu Apr 22, 2021 8:06 am
Just wondering how you harden the threads in holes taped into wood; wing mount blocks, landing gear blocks, etc.
I used to apply 30-minute epoxy in the threads, the re tap, then I moved onto thin CA (three times, re tapping the threads between each), but anymore I just apply CA once.
Just curious what else is prevalent.
Thanks.
Tim Lampe
I used to apply 30-minute epoxy in the threads, the re tap, then I moved onto thin CA (three times, re tapping the threads between each), but anymore I just apply CA once.
Just curious what else is prevalent.
Thanks.
Tim Lampe