Several racers are using OpenTX-based transmitters for EF-1. I have made up a small collection of .bmp images that you can use on your transmitter as desired. Feel free to copy and/or distribute as you feel fit to do so. For those of you who don't use OpenTX, these are probably of no use. If you need a specific airplane that is not here, let me know and I'll see what I can come up with.
Renamed files... these should work
OpenTX / Taranis .bmp images for EF-1
OpenTX / Taranis .bmp images for EF-1
Last edited by gsjames on Sun May 14, 2017 7:19 pm, edited 1 time in total.
Re: OpenTX / Taranis .bmp images for EF-1
Oh, and another thing. If anyone is using an OpenTX transmitter AND the FrSky S6R or S8R receiver with stability augmentation and telemetry, I would LOVE to have a copy of your .eepe file. I am working on one, but am not quite satisfied with it. Remove the .pdf extension and this should work, it's for OpenTX Companion 2.1.x
Re: OpenTX / Taranis .bmp images for EF-1
I made an error in the file names of the EF-1 bitmaps. The file name must be NOT more than 10 symbols with NO imbedded blank spaces. If it doesn't meet these naming requirements, the OpenTX transmitter won't recognize it even though it's a legitimate file. I'm pretty sure that some of them have file names that are too long or have spaces. Just change the name of the file to suit the requirements and it will be OK. Sorry about the confusion, it's the first time I have made any of these and I missed the naming requirement. I fixed the names and reloaded the .zip file in the first post.
Re: OpenTX / Taranis .bmp images for EF-1
I'm not currently using the Taranis for EF1. If I change and add the stabilization receiver to an EF1 airplane I'll share the eepe.
Chris
Chris
-
- Super Contributor
- Posts: 615
- Joined: Fri Dec 27, 2013 12:37 pm
Re: OpenTX / Taranis .bmp images for EF-1
I have downloaded the images that Gary James created and added them to my DropBox location for sharing model images.
It is at https://www.dropbox.com/sh/sm5xb9wgyfzn ... OsrVa?dl=0
Anyone can view these, but if you want to upload or edit, I need to add you as an Editor/Contributor.
I created a folder for Gary for sharing his openTX work at https://www.dropbox.com/sh/9rgzhxvr8qmz ... uLdIa?dl=0
It is at https://www.dropbox.com/sh/sm5xb9wgyfzn ... OsrVa?dl=0
Anyone can view these, but if you want to upload or edit, I need to add you as an Editor/Contributor.
I created a folder for Gary for sharing his openTX work at https://www.dropbox.com/sh/9rgzhxvr8qmz ... uLdIa?dl=0