9x6 prop

A forum for electric pylon racing discussisons including Electric Formula 1.
Post Reply
User avatar
RCjunkie
Super Contributor
Posts: 307
Joined: Fri Feb 04, 2005 9:58 pm
Location: Erie, Mi.
Contact:

9x6 prop

Post by RCjunkie »

Being I can use a 9x6 prop for 424E ,can I use it in EF1?
2 wrongs don't make a right But 2 Wrights makes a Airplane
Kevin Matney http://www.Matneymodels.com
734 - 848 - 8195
"IN GOD WE TRUST " 44W
twitte
Super Contributor
Posts: 632
Joined: Fri Jan 16, 2009 12:17 pm
Location: Mint Hill, NC

Re: 9x6 prop

Post by twitte »

Kevin,

The 2022-2023 rulebook clearly states, that for the AMA 427 class, the only prop allowed is the 8x8e.

e. Propeller
Propeller shall be the APC 8 x 8 Thin Electric Propeller, part number
LP08080E. The propeller shall be used in stock configuration except that
it may be balanced be by removing material from the face of the heavy
blade. Any twisting, bending or tampering of the stock propeller is
prohibited and will not be allowed.


Trey
User avatar
RCjunkie
Super Contributor
Posts: 307
Joined: Fri Feb 04, 2005 9:58 pm
Location: Erie, Mi.
Contact:

Re: 9x6 prop

Post by RCjunkie »

This should have been the prop from day 1, Longer blade is great for takeoffs and the first turn
2 wrongs don't make a right But 2 Wrights makes a Airplane
Kevin Matney http://www.Matneymodels.com
734 - 848 - 8195
"IN GOD WE TRUST " 44W
Greg Doe
Super Contributor
Posts: 142
Joined: Fri Jul 07, 2017 8:11 pm

Re: 9x6 prop

Post by Greg Doe »

Probably lower torque effect too?
Sparky
Super Contributor
Posts: 113
Joined: Thu Jul 16, 2015 10:34 pm
Location: Brown Co, IN

Re: 9x6 prop

Post by Sparky »

I hope you bring a lot of spare props. A 9" prop would be problematic with the current configuration on our planes. I'll try them next time I'm out compared to the current 8x8 I suspect DK already tried them out in his extensive testing.
Sparky
Bob_T
Super Contributor
Posts: 64
Joined: Mon Jan 23, 2017 1:49 pm
Location: Cincinnati, OH

Re: 9x6 prop

Post by Bob_T »

If I read correctly, for 424 electric, the prop is a 9X6E prop, not standard 9X6 nitro prop. I may have read that wrong, but I'm pretty sure there was an "E" at the end of the prop designation, just like for the 8X8E prop we use for EF1. Having said that, since they hand out props for both 424 and EF1, I would assume that at the races, the CD will need to be sure they are stocked with 9X6E props as well as the 9X6 nitro and 8X8E props. :D

edit: Just looked up the 424 Electric provisional rules and here is what it says for propellers:

b. Propeller
1) Material APC composite or a similar, commercially available composite.
2) Dimensions Minimum diameter nine (9) inches. Nominal pitch six (6) inches, as indicated by the manufacturer’s stamp or packaging.
a. IC propeller: LP09060 (9X6)
b. Electric propeller: LP09060E (9X6E)


Bob
twitte
Super Contributor
Posts: 632
Joined: Fri Jan 16, 2009 12:17 pm
Location: Mint Hill, NC

Re: 9x6 prop

Post by twitte »

Bob,

Yes, the "e" version of the 9x6 APC prop is the one called out for 424e.

As for the handing out of props, it is up to the CD to make that desicion to provide/not provide props for 424, 424e and 427/EF1. At the Nationals, I will provide the props. At my races at OJA, I allow pilots to use their own props.

Trey
Post Reply