SOLD
Was doing a little house cleaning and gathered all my 2-blade electric F3E/F5D pylon props, separated, counted and listed below. Most are brand new, not used. A few have been mounted and/or used. I don’t have every single spacer ring for every single prop, but there are plenty of spacers in separate bags or in with the unopened props. For some reason, the Graupner 5.0 x 5.0 props have a larger hole, but I have machined spacers for them for use with the MP Jet spinner.
APC (mostly new, unused, all unmodified)
6.0 x 5.5: 5
5.5 x 6.5 (carbon): 9
5.5 x 6.5: 28
5.5 x 4.5: 8
5.25 x 6.25: 11
5.25 x 4.75: 2
5.0 x 5.0: 12
4.75 x 4.75: 9
4.75 x 7.8: 3
4.7 x 4.2: 6
4.5 x 4.1: 3
Graupner (mostly new, unused, all unmodified)
6.0 x 6.0: 2
5.5 x 5.5: 11
5.2 x 5.2: 21
4.7 x 4.7: 10
Various props modified as described:
Props in the 5.0 x 5.5 range re pitched: 7
Various props, re pitched, cut down, modified: 14
Hand-made carbon fiber props (5” – 6” diameter): 3
I’m not counting the 24 modified props in my price calculation that follows – those are viable props, but I’m throwing those in for free. I’m averaging the nylon APC props at about $2.50 each. The 9 carbon props are about $7.00 each, so the total value of the 87 APC props @ 2.50 ea = $217.00 + 9 @ 7.00 = $63.00 = $280.00
I’m averaging the Graupner props at $6.00 each x 44 props = $264.00.
So not including the 24 modified props, the value of the APC and the Graupner props adds up to about $544.00.
I’ll take $250.00 for the lot shipped in the US. I do Paypal at tim dot lampe @ hotmail dot com, or cash if I bring to a race.
Tim Lampe
SOLD