Nitro Plane Miss Dara is no longer available.
Should be indicated in the approved list of EF-1 model.
Miss Dara
-
- Super Contributor
- Posts: 126
- Joined: Mon Jul 15, 2013 12:18 pm
- Location: Paris, Ontario, Canada
Re: Miss Dara
Glad i still have one in the box.
-
- Super Contributor
- Posts: 513
- Joined: Wed Mar 09, 2011 11:44 am
- Location: Paola, KS
- Contact:
Re: Miss Dara
I have a used one I might be talked out of...
Out of all the places we could be, this is one of them.
Re: Miss Dara
Glad Tower's still making Proud Birds ![:)](./images/smilies/icon_smile.gif)
![:)](./images/smilies/icon_smile.gif)
-
- Super Contributor
- Posts: 513
- Joined: Wed Mar 09, 2011 11:44 am
- Location: Paola, KS
- Contact:
Re: Miss Dara
I have one of those I might be talked out of, too...
Currently replacing the tail feathers. I got this from a friend in a trade - and actually, my Wagner Solution was the culprit that chewed up the original tail feathers on a mid-air on takeoff, so I knew what I was getting! He went ahead and flew the race and won it even with a few teeth marks in the elevator and rudder, but I decided to replace the parts instead of repairing the existing, since I was able to get a set of new parts from someone who did a rivets conversion on a proud bird.
![:)](./images/smilies/icon_smile.gif)
Currently replacing the tail feathers. I got this from a friend in a trade - and actually, my Wagner Solution was the culprit that chewed up the original tail feathers on a mid-air on takeoff, so I knew what I was getting! He went ahead and flew the race and won it even with a few teeth marks in the elevator and rudder, but I decided to replace the parts instead of repairing the existing, since I was able to get a set of new parts from someone who did a rivets conversion on a proud bird.
Out of all the places we could be, this is one of them.