NMPRA

Good Morning - I'm rigging a used QM40. I have a slight rub between the spinner back plate and the nose of the fuse.

Does anyone have the P/N for the spacer some of you coined "A Lyle Spacer" or the link to Mcmaster carr?

Much appreciated.

MikeyD

Hey Mike.

If you can't find them I'll ask Dub for you. I got one from him before.

Tim

Mike,

Mike Langlois sells the brass collets in different lengths which is probably the preferred way to do it. Having said that, I have used Lyle washers for years with success. If you want to text me your address, I can drop a handful in the mail for you Tuesday

The "Lyle washer" (Actually a inner race spacer) won't work on a Nelson because it has a 10mm ID.
For a Nelson get the tapered clollets in various sizes from Langlois as Craig suggested

Bruce

https://www.mcmaster.com/90917A728/

For Nelson. 5/16 id, .5 od .010 thick.
I assume the nelson shaft is still 5/16.
Jett is 10 mm id.

Mike i have some in my box. See you this weekend.
T

Thanks all..

Mike D