Are these spinners Tru Turn 1 1/2" Turbo Cool Standard Spinner E 2 Blade legal and will they continue to be?
I'm getting ready to get some for my World Models Outrageous and Scarlet Screamer airplanes.
Legal Spinner?
-
- Super Contributor
- Posts: 615
- Joined: Fri Dec 27, 2013 12:37 pm
Legal Spinner?
- Attachments
-
- truq2001.jpg (11.01 KiB) Viewed 3398 times
Re: Legal Spinner?
Here is what the rule states:
"Spinner: Spinner diameter should represent that used on the full size airplane. Slightly smaller is acceptable, provided it is a minimum of 1.5" (38 mm). Spinners must be commercially available and stock. Acceptable modifications of a stock spinner are limited to removing or adding material for balancing; removing material to mount the spinner to the motor; or removing material to provide clearance for the propeller and the spinner cone. Spinners included with ARF kits are considered commercially available."
Randy
"Spinner: Spinner diameter should represent that used on the full size airplane. Slightly smaller is acceptable, provided it is a minimum of 1.5" (38 mm). Spinners must be commercially available and stock. Acceptable modifications of a stock spinner are limited to removing or adding material for balancing; removing material to mount the spinner to the motor; or removing material to provide clearance for the propeller and the spinner cone. Spinners included with ARF kits are considered commercially available."
Randy
-
- Super Contributor
- Posts: 197
- Joined: Wed Mar 14, 2012 2:23 pm
- Location: Powder Springs, GA
Re: Legal Spinner?
So the TrueTurn Turbo Cooled spinner meets all the requirements of the rules so it must be legal.
Barry 14T
Re: Legal Spinner?
Yep, those are legal
DK
DK
Re: Legal Spinner?
I have used then in the last 2 nates.
2 wrongs don't make a right But 2 Wrights makes a Airplane
Kevin Matney http://www.Matneymodels.com
734 - 848 - 8195
"IN GOD WE TRUST " 44W
Kevin Matney http://www.Matneymodels.com
734 - 848 - 8195
"IN GOD WE TRUST " 44W